Have you ever thought about wire wrapping before? Possibly you don’t know where to start or what tools you’ll need. Anytime you start anything new, it can be intimidating, I know. One of the appealing benefits of wire wrapping is that you don’t need a lot of tools. Another wonderful perk is that you can wrap all kinds of things: found objects, semi-precious stones (with or without holes) and of course, beads. In the article below, I’ve broken down the jewelry tools, work area, wire and materials and other important information to help you get started.
What You’ll Need to Start Wire Wrapping
Tips on Tables & Chairs
Wire Wrapping Storage Space
Wire Jewelry Tools
Choosing your tools can be daunting, however, below I have listed the basic jewelry tools you’ll need to get started. Our 14 piece Advanced Wire Wrapping Kit includes all of the basic supplies, a step-by-step book: Moods in Wire, plus some of the additional suggestions I’ve listed a little later.
Basic Wire Wrapping Supplies
- Wire Cutters
- Permanent Marker
- Jewelry Making Pliers: Round, bent nose and chain (use these to tuck in wire ends and shape your wire)
- Gauge (measures the inside of holes for beads and the width of the wire for gauging)
- Needle Nose Flat File (for filing the wire ends)
- Rawhide or nylon hammer (these won’t mar your metal when flattening)
Suggested Wire Jewelry Tools
The first five suggested items listed below are already included in the kit shown above. They’re not critical when starting out, but helpful, unless you are going to make finger rings, then the ring mandrel should be under the basic wire wrapping supply list.
- Magnifying Visor
- Ring Mandrel (for gauging ring sizes)
- Pin Vise (Use it to make twisted wire)
- Tiered Mandrels (for making circular shapes)
- Wire gauge (unless you mark your wires really well, this will identify the wire gauges quickly)
The metal jaws on pliers tend to mar wire, so I use nylon tipped pliers. Yes, the nylon will get dented and lose their shape over time but it will never scratch up a piece you’ve spent hours on. It’s worth spending $2-5 dollars on replacement jaws than ruin a beautiful finish to me.
Here are the 5 pliers we use in the studio the most.
Copper & Sterling Silver Wire
There are a variety of wire gauges you will need and/or want as you advance in wire wrapping. I can’t stress this enough when you’re first learning practice with copper before moving on to sterling silver wire. It’s cheap, therefore its easier to make mistakes than it would be using a more expensive material. Also, keep your wire as straight as possible before you start bending it. Wrapping wire will work harden it. When it becomes too hard to work with, it will break in half, so take care not to bend it unnecessarily.
Although it will ultimately be your choice, here are some suggestions when choosing wire gauges.
- Frames: 16-20 gauge
- Wrapping: 26-28 gauge
- Weaving: 28-30 gauge
Beads, Stones and Other Fun Materials
Objects to wrap are completely up to you! You can find semi-precious stones with or without holes, sterling silver beads, copper beads, crystals, cabochons, found objects… etc. The list goes on and on. You will love searching for materials to wrap and your studio will probably start filling up with all kinds of fun objects.
How to Learn Wire Wrapping
For a few days, I played in the studio learning how to wire wrap with copper and sterling silver wires. We had a new wire wrapping kit that came in and I wanted to look at the book: “Moods in Wire” by Ellsworth “Ed” Sinclair that was included and check out the tools. So for those two or three days, I watched tutorials online, browsed through the book, and played with different wire gauges, beads, and stones. I honestly wasn’t sure how I would like it, but I really ended up loving this craft!
First of all, there aren’t a lot of jewelry tools that you need. Many of these jewelry making tools you probably already own. Secondly, you can enjoy this art doing it almost anywhere. Wrap a stone or bead while watching T.V. or, even better, while sitting in a booth at a jewelry show. There are no soldering supplies or a torch to lug around. It’s just a few tools, copper or sterling silver wire and whatever materials you want to wrap. And the last thing, which was the most surprising to me, is that it was not only fun but it was also super relaxing.
Don’t get me wrong, metalsmithing will always be my favorite thing to do. I love working with a torch! I daydream about jewelry designs constantly. While I’m writing articles at my desk, I catch myself staring down into the studio longing to work at the jewelry bench instead. Having said that, when you metalsmith you cut, drill, solder, pickle, finish and tumble your jewelry pieces, seemingly all at the same time. Yet, when you wrap a gorgeous stone, it becomes meditative. I found that this experience was completely different than what I was accustomed too and the change of pace was nice. Have fun, I sure did!
The video below covers the kit and tools plus I browse through the pages of the book. It also covers some of the jewelry pieces that I made including the wire gauges used for each piece. Last, but not least, I’ll show you how to make jump rings and earwire hoops.