Soldering copper and brass metals can be challenging, but here in our employee studio, we use base metal for many projects. All of our beginner’s classes start with these two metals for fabricating mixed metal pieces. We use them for earrings, pendants and especially cuffs. You can’t find a metal that patinas as nicely as copper or metal that polishes as easily as brass. Base metals are inexpensive and less intimidating while you are learning new techniques and tools.
Soldering base metals is a lot different than soldering with sterling silver or gold. Since copper is the trickier base metal, after successfully soldering with copper, switching over to sterling silver becomes an easy transition to make.
Understanding your Materials
- Ductile = stretching (If a metal is ductile it can be drawn through a draw plate without breaking)
- Malleable = compressed (If a metal is malleable you can pound on it with a hammer or roll it through a rolling mill)
I love working with copper! It’s soft and malleable, patinas easily and it improves with age. Call me naive but I thought, since it’s on the Periodic Table, it would be mined in its natural state. But did you know that very little pure copper is actually found in that form? Copper is instead commonly found in ores.
If you’re looking for a fun practice design, try out this copper flower ring.
Brass metal is mainly a combination of copper and zinc. It is ductile and malleable, just like pure copper. There are 60+ different types of brass alloys, but the two most popular types for jewelers are yellow brass (copper 67%, zinc 33%) and red brass (copper 84%, zinc 15%, iron 0.05%, lead 0.05%).
Planning your Design
Now that you understand the materials you’re working with, the next phase would be to plan your design. When I plan out my jewelry designs I keep in mind that I’m using silver solder and not copper solder. There are reasons for this. Copper solder is very brittle therefore it breaks often when texturing or maneuvering a piece after it has been soldered. Another reason is that it’s not an exact color match after it’s soldered onto a piece anyways. But the main reason why I choose not to use it is that there is only one flow temperature with copper solder. There aren’t any soft, medium or hard copper solders available so that makes it more difficult when creating multi-step soldered pieces. I prefer to work with silver solder and just plan around the visible joins that will result.
You can overcome the different colored join issue in your designs in a variety of ways.
- Implement the solder joins into your design. For example, add silver embellishments so the silver coloring becomes part of the piece.
- Hide the joins by wire wrapping around them.
- Sweat solder your pieces so that the solder is underneath and hidden from view.
- Plate the entire piece with a uniform metal finish once it is completely fabricated.
- Patina the piece (Silver solder does not patina as well as copper, so I dip the entire piece first then use Liver of Sulfur, applied with a paintbrush, on the join itself).
Prepping your Copper and Brass Metals
Preparing your metals before soldering jewelry is crucial. Neglecting just this one step can really be the difference between success and failure when you attempt to solder. The first thing you need to do is check your join. Those two pieces (or ends) must fit perfectly together. If it’s hard to see, hold them up to a light source and see if any light shines through the join. If it does, use sandpaper, files, a saw blade or whatever else works, until that join is tight.
Now, you can prepare to solder.
Soldering Copper and Brass
Soldering copper can be difficult. It melts at 1983º F, which is very high compared to other metals! To put that into perspective 14kt gold melts at 1615º F, sterling silver at 1640º F, brass between 1650-1724º F, and fine silver at 1761º F. Add 222º F to that last temperature and you’ll finally melt your copper. That’s a lot of heat and some torches simply can’t melt it. But what if your goal is to just solder it? That’s a great question.
Tip:The flame doesn't melt the solder, the metal does.
Meaning, no matter how long you hold the flame over the solder it simply won’t flow. Solder will not flow on cold metal. You must always focus on heating the metal and when that gets hot enough the solder will flow. So, as you can see, it’s really important to get the metal hot enough to reach the temperature of the flow point of the solder. We use silver solder when we’re working with copper and brass so this is our reference chart when we need to see flow temperatures:
The amount of zinc in a metal lowers the melting point, that’s why brass melts at a lower temperature than pure copper. As you can see in the chart above, you can use any silver solder on copper or brass metal, but solder flow points vary between vendors so always check the flow points of the solders you choose to use.
Torch Tips & Flames
Note: We use a Smith torch here connected to air/acetylene tanks. We have three torch tips for everything that we do here and that’s the perfect number for us. The small tip is used for small soldering joins (jump rings, earring posts), the medium tip is used for most of the soldering pieces (rings, pendants), and the large tip is used for the large jobs (cuffs, annealing, and melting).
Soldering Brass & Copper Troubleshooting Tips:
Solder not flowing:
- Metal could be too dirty/oxidized
- Torch tip too small for the heat needed
- Incorrect fuel for the job
- Incorrect flux/or no flux used
Not enough heat:
- Use a larger torch tip
- Create an enclosed space to solder in using fire or soldering bricks
- Solder on a charcoal block (charcoal blocks reflect heat, which warms up your piece significantly)
Brass turns pink when pickling (zinc has burned off, so copper is all that remains on the surface)
- Use sandpaper or 3m Radial Bristle Disks on a rotary tool to remove
- Place the jewelry in a container filled with pickle and a small amount of hydrogen peroxide. Remove it when it’s clean (do not leave it in the mixture!)
Silver solder joins stand out because of the color difference:
- Plate it! Place the jewelry in pickle, add a piece of steel, let the copper plate the solder joins, remove the jewelry & steel from the pickle. You will not be able to reuse your pickle once you use it for copper plating.
- Oxidize the jewelry piece
- For even more ideas, refer to Planning your Design in the text above
Visit us at Halstead for all of your jewelry-making supplies!
Here are more great soldering articles:
http://www.madehow.com/Volume-4/Copper.html: How Products are Made explains in detail the entire process of extracting copper. It’s a great read!