How to Set Geodes & Slabs

How to Set Geodes & Slabs
Setting geodes and slabs can be challenging at times but this blog will cover the two basic settings to get you started. Both require basic soldering skills.

One of my favorite projects in the studio is to set unusually shaped stones. I love the problems that these types of stones require me to solve and setting geodes and slabs fit right into this category. I have a handful of rough slabs that I have collected in the last year and have also been fortunate to get my hands on a few geodes too. Setting geodes and slabs, though they seem challenging if you understand simple basic settings you can start from there.

Geodes

Setting Geodes and Slabs

Geodes come from rocks which are cut in half, exposing the crystal center inside. The nice thing about geodes is you never know what the center of the stone will look like. It’s a pleasant surprise every time. When purchasing a finished geode they are sold in pairs so that customers have both sides of the rock, which is great if you’re making matching earrings!

Prong Setting
When setting a geode you need to be careful not to damage the crystals in the center. Prong settings are the most popular but the prongs can damage these crystals. The prong setting here were made from round jewelry making wire.
The colors are so vibrant in geodes that when you incorporate them with sterling silver findings it really makes them pop.
Geode-CZ-Moon-Earrings

 

Slabs

setting Rough Slabs

Rough slabs come in a wide array of shapes and sizes so no two will ever be the same. Although the sizes vary, tab settings are a fairly simple way to mount these types of stones.

The tabs here were made from flat sterling silver wire. You can also get creative and wrap slabs in fancy pattern sheet to hold them in place.
Balancing your slab is the trickiest part. If it leans too far to one side it can drag your piece down. When designing, try to incorporate the weight of the piece and plan to hang it at that point. Also, be careful with large slabs. They tend to be heavy and can be challenging to balance and set securely. Keep comfort on the body in mind when you design the finished piece of jewelry.
Aventurine Starfish Pendant

 

Check out my latest articles in the September/October 2018 issue of Lapidary Journal Jewelry Artist.

Lapidary Journal Jewelry Artist Sep/Oct 2018

Shop Sterling Silver Jewelry Supplies

 

 

 

 

 

Written By
More from Erica Stice

6 Steps to Soldering Earring Posts

Learn how to solder earring posts on blanks or other ornaments in...
Read More

1 Comment

Leave a Reply

Your email address will not be published. Required fields are marked *