Guide to Hand Stamping Metal Blank Options

From durability to price, check out our guide to metal blank options for making hand stamped jewelry.

 

Hand Stamping Tools: Metal Stamps and Metal Blanks

Hand stamping remains one of the hottest trends in artisan jewelry today. As the trend matures, more and more metal stamping blank products are available on the market to cater to jewelers doing custom work. It can be overwhelming. This blog will compare the different blank materials from a stamper’s perspective.

Reference Chart: Hand Stamping Metal Options

Aluminum – Aluminum makes a great practice metal because it is inexpensive, soft and it has the same look as silver. However, it will have a limited life because it lacks durability. Aluminum easily bends and scratches. It will wear quickly and cannot command solid resale prices. Avoid aluminum for bracelets in particular. However, Aluminum is quite lightweight making it an interesting alternative for earring designs and larger pendants that would be too heavy/expensive in sterling.

Brass – Brass is a hard metal and it is more challenging to stamp. It requires a firm strike but it is doable. We recommend practicing on scrap metal of the same gauge before using your blanks to minimize mistakes and waste. With some practice you can successfully stamp brass with consistently good results.

Copper – Copper is a very soft, inexpensive metal so it is the recommended choice for beginning stampers. It will take a clear stamp impression and it is easy to find in the market. Copper is prone to rapid tarnishing and the resale price points are low. However, it is a great element in mixed metal designs.

Fine SilverFine .999 silver is an expensive metal. However, it is the softest alternative on the market in the precious metal group. If you are looking for high price points and perceived value it may be a good choice. Fine silver is not as hard or durable as sterling so it will scratch and bend easily. It is a good choice for necklaces but it will not hold up to the bumps and scrapes endured by bracelets.

Gold-Filled – Gold filled is an affordable alternative to solid gold. It is fairly easy to stamp and it has the classic beauty of yellow gold and rose gold jewelry.

Pewter – Pewter is cast instead of stamped from sheet metal so the blanks are thicker and have a different feel. Pewter is easy to stamp with a clear, defined impression. It will not tarnish unless it is plated with silver. Ordinarily, pewter would be inexpensive compared to most metals but since the blanks are so much larger/heavier the price savings are less significant. Instead, they provide an interesting design alternative for more substantial blanks.

Solid Gold Gold is the most expensive metal blank option on the market. Gold blanks are typically made in thinner gauges so it takes skill and practice to stamp without denting the surrounding material or bending the piece. Due to the price and tricky nature of solid gold blanks they are best for more experienced stampers looking to offer high-end custom options for clients.

Stainless Steel – We do not recommend hand stamping stainless steel for two reasons. First and foremost, it is very hard on your joints. Steel is an exceptionally hard metal and while it is possible to stamp it, every strike will reverberate through your hand, wrist and elbow. Second, it is hard on tools. You will quickly wear your stamps and brass hammers if you are stamping steel. You may even shear off your hammer heads due to the blow force between tools and working metal.

Sterling Silver – Sterling is one of the most popular choices for stamping. It is durable, stampable and easily available in the marketplace. When stamping you will notice that it takes a harder strike than copper but not quite so much muscle as brass. Sterling is more expensive than base metal alternatives but it has the best perceived value among buyers.

Halstead carries metal stamping blanks in all of the metals above, except stainless steel. See our complete selection of supplies for making hand stamped jewelry. Or, you can navigate our website by metal to find blanks and other jewelry supplies.


Follow on Bloglovin

More from Hilary Halstead Scott

Basic Metalsmithing Concepts for Jewelers: Work Hardening and Annealing

This is an introduction to the concepts of work hardening and annealing....
Read More

No Comments

  • I love your products! Excellent quality for an awesome price. My customers are happy with the items I make with your products. We just moved again, so when the unpackings done, I’ll be placing an order! I’ve been wanting to do the stamping!

    • Thanks Christine, we love to hear from our customers. Stamping is a ton of fun! It takes a little practice so we recommend you watch how-to videos to get the hang of it when you’re just starting out. Glad your move went well and we’ll hear from you soon!

Leave a Reply

Your email address will not be published. Required fields are marked *